1) Set the cursor in the measure where you like to enter the repeat signs.
   When entering repeat signs, the repeat will be added to the beginning
   of the bar regardless of which way the repeat sign points.  So if, 
   for example, you want to repeat back to the beginning of the piece from 
   the end of measure 38, you have to enter the repeat sign pointing left 
   at the *beginning* of bar 39 (select bar 39 and then repeat left).

2) After setting the cursor in the appropriate measure, go to the menu bar 
   at the top of the screen and select Display -> Bar.  

3) The sixth field in this dialog is for barline.  
   *Seventh for MW Maestro or MW 2000 PE* 
   Open its drop down menu and select the appropriate repeat sign.

4) If you want the MIDI playback to actually repeat, click on Options at 
   the top and be sure 'Play Repeats' is checked.

5) For first and second endings, draw them in by selecting the pencil tool 
   and then click the Symbols button.  Select the Adjust section under Symbols
   and then choose a first or second ending.  Now you can draw the selected 
   ending over the required measures and adjust the way it looks by dragging 
   on the dots. 
   When you are satisfied with the placement, hit [ENTER] to set it.
___________________________________________________________________________