In order to record the MIDI playing back in MW Songwriter/Maestro as a wave 
file (which you could then burn onto a CD), you would need to also have wave
recording software, such as AudioSurgeon installed on your computer. You can 
purchase AudioSurgeon for just $29.95 on our website, 
http://www.voyetra.com.

Then you just select the appropriate recording source on your soundcard.

                       **********************

Below are instructions on how to select a recording source:
*  Click on Start>Programs>Accessories>Entertainment>Volume Control

*  In the upper left click on Options/Properties.

*  Be sure you are set to Playback and check all boxes in the white section
   at the bottom.

*  Do NOT click OK yet.

*  Switch to recording by clicking the Recording radio button.

*  Check the all the boxes in the white section below for this setting too.

*  Now click OK.

*  In this recording volume control, be sure the source (it might say MIDI,
   mixed output, stereo mix, etc.) you are trying to record from is selected
   and the volume is up.

                       **********************

Recording in AudioSurgeon:

When you have AudioSurgeon opened, you can just click on File>New and 
select 'CD Quality' which is under 'Named.' You can then record by pressing
the red recording button. Once it is recording, you can then start your song
playing in MW Songwriter/Maestro.

Once you have your song recorded as a wave file, you can then burn this wave
file onto a CD using your AudioSurgeon or your CD burning software.

_____________________________________________________________________________