Q:  I have third party USB port midi connection. When I do a sound check
    and select the MIDI Synth test and select my MIDI Device it will recognize
    it because when I toggle the play button I get my device to the piano. 
    
    But when I leave the screen or select MIDI input test it will not maintain
    the selected device. When I select my device in the MIDI input test I get
    one LED for the MIDI channels to lite up and this will not maintain the
    selected device also.


A:  - Connect the "MIDI In" cable plug to your keyboard's "MIDI Out" port.
    - Connect the "MIDI Out" cable plug to your keyboard's "MIDI In" port.  

    Do not worry about the Soundcheck. Just go into the Piano Lessons, then
    Lessons. Once you sign in, click on the 'Setup' (on the Piano F key)
    on the displayed piano picture. This is where you can adjust your MIDI 
    Input and Output devices for this software, according to what MIDI devices
    you have installed on your system.  

    If you have the Turtle Beach USB Cable, make sure you select as the 
    MIDI Input device: 
    "Turtle Beach USB MIDI 1x1" 
______________________________________________________________________________