The Control Panel for this Sound Card is installed by default when you run 
the Driver installation. You may Activate the SRM control panel by clicking 
on the Turtle Beach Palm Tree icon in the System Tray in the bottom right of 
the PC screen. Then click Control Panel from the pop up menu.

Control Panel Settings Summary: 
This section of the Speakers Tab summarizes Control Panel settings:
  * Stereo to Multi-Speaker: 
      Indicates that a stereo source will play in surround sound because 
      the Speaker Configuration is set to either 4, 5.1 or 7.1 speaker mode.
      To play stereo with two speakers, set the Speaker Configuration to 
      2 Speaker mode.

  * Multi-channel to Sub: 
      Indicates that the speaker channels are being routed to the sub-woofer
      output. Set by clicking the Speaker Options button in the Speakers Tab.

  * Master Equalization: 
      Indicates that the Master Graphics Equalizer is enabled, therefore 
      the system frequency response is being modified by the Master Equalizer
      settings.

  * Speaker Equalization: 
      Indicates that the individual speaker frequency response is being 
      modified by the Speakers Equalizer, accessed via the Advanced (…) button
      in the Speakers Tab.

  * Speaker Position: 
      Indicates that the speaker positions in the Effects Tab have been moved.
      If the sound is not emanating from the speaker being tested, check the 
      Speaker Position settings.

  * Environments: 
      Indicates that Environments in the Effects Tab are enabled, which adds 
      a reverberation to the sound.

  * Key Shifter: 
      Indicates that the Pitch Shifter in the Effects Tab is enabled, which
      alters the digital audio output.

  * Center Canceller: 
      Indicates that the Center Canceller effect in the Effects Tab is
      enabled, which removes audio signals that are panned to the center of a
      stereo source.
_____________________________________________________________________________