Fiji - FAQs

All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
Product Information
                             MultiSound Fiji(TM)

Turtle Beach(TM) has a long-standing commitment to digital recording and 
audio workstation applications.  The company's first product, the 56K 
digital recording system was centered around the semi-pro, and home studio 
markets, where accurate digital reproduction is an absolute necessity.  Now 
Turtle Beach reclaims this market with the MultiSound Fiji, a member of the 
MultiSound(R) Pro Series of audio cards.  

This card was designed with one person in mind - The Perfectionist.  When 
audio quality cannot be compromised, the Fiji will deliver crystal clear 
audio recording and playback, while the digital I/O option allows for 
transfer of audio to DAT to maintain first generation quality throughout the 
mixing process.  Either way, once you've spent so much time getting your 
audio perfect, why risk the quality of your work? Look at the specs on the 
card - signal to noise ratio of 97 dB, 20-bit DAC/ADCs, optional digital in 
and out, WaveBlaster connector for adding MIDI, Hurricane Architecture for 
high speed data transfer, and Stereo In, Out, and Mic (both condenser and 
dynamic), all higher quality for significantly less cost than the 
competition.

Remember, when only the very best will do - it has to be Turtle Beach!

Key Features
* Audiophile quality 20-bit DAC/ADC 
* >97 dB Signal to Noise Ratio 
* Windows(R) 95 Plus & Play Compatible 
* Stereo Mic & Line Inputs & Outputs 
* Supports Condenser and Dynamic Microphones 
* Hurricane Architecture 
* Enhanced Full Duplex for Telephony and Internet Applications 
* Motorola 56002 DSP (Digital Signal Processor) 
* WaveBlaster Compatible Header for MIDI Upgradeability 
* MPU-401 Compatible 
* Joystick Interface 
* Optional (S/PDIF) Digital I/O (with daughterboard) 

Hurricane Architecture
Like all the cards in the MultiSound Pro Series, the MultiSound Fiji has 
Turtle Beach's Hurricane Architecture to speed audio throughput and increase 
the number of simultaneous digital audio streams.  This technology is up to 
eight times faster than DMA (direct memory access), which is used by 
virtually all other cards on the market.

DSP
The Fiji features the Motorola 56002 DSP chip, for offloading processor 
workload, and allowing greater speed in computations.

Audio Specifications
* Signal to Noise : >97 dB 
* THD: <.005% 
* Phase Response: +/- .1 degrees 
* Stereo Crosstalk: 100 Hz-90 dB, 1 KHz-90 dB, 10 KHz-90 dB 
* IM Distortion: <.01% 
* Frequency Response: 10 Hz-22 KHz +0/-1 dB 
* Sample Rates: 5 kHz-48 kHz 

System Requirements
* IBM(R) PC or compatible computer running Windows(R) 3.1x or 95
  Windows 3.1: 486 DX/33 processor, 4 MB RAM
  Windows 95: 486 DX2/66 processor, 8 MB RAM, 120 MB hard disk
* CD-ROM drive to install Voyetra's Digital Orchestrator Plus
* High-quality stereo sound system, powered speakers or headphones
* Free ISA 16-bit card slot
* One free IRQ channel
* 32k upper memory block available

Product Logistics
* Model Number: MultiSound Fiji 
* UPC: 737762 402284 (Fiji) 737762 402291 (Fiji w/ Digital I/O) 
* Box Dimension: 7.5" x 4" x 14" 
* Board Dimension: 7.25" x 4" 

                  (c) 1997 Voyetra Technologies, Inc.  

Turtle Beach and Fiji are trademarks of Voyetra Technologies, Inc.  
Voyetra and MultiSound are registered trademarks.

______________________________________________________________________________