Support for Legacy products is limited to the info posted on our Website.
____________________________________________________________________________

If you wish to experiment with Win XP using a Fiji, here are (strictly 
*unsupported*) instructions:

Although the Fiji can be used in Plug n' Play mode in Win 9x using the Win 9x
drivers, the drivers that we will use to install in Win XP are the Win NT 4.0
drivers and are not Plug n' Play compatible. 

Therefore, before you start, you should perform a "hardware resource
inventory" and write down what resources are free for the Fiji to use,
and change the J9 jumper accordingly.

If you had a working Win NT 4.0 configuration with the Fiji, 
you may wish to duplicate those settings in Win 2000. 


NOTE: Although you have functionality of the soundcard, the Device Manager 
      will report: "No drivers are installed for this device".  
      You may ignore this.
____________________________________________________________________________

To install the Fiji in Windows XP:

1) Open the Add Hardware applet.
   (Start > Control Panel > Printers and Other Hardware > Add Hardware.

2) The "Add New Hardware" window will appears. Click Next 
   Win XP will search for new hardware. 

3) Select "Yes, I have already connected the hardware". Click Next

4) Select "Add a New Hardware Device" from the list.  Click Next

5) Select "Install the hardware that I manually select from a list". 
   Click Next

6) Select Sound, video and game controllers.  Click Next

7) Click on Have Disk...

8) Browse to the directory where you have stored your Fiji drivers.
   When the OEMSETUP.INF file is found, select it and click Open, then OK. 

9) A window "The Software you are installing has not passed Windows 
   Logo testing to verify its compatibility with Windows XP" will 
   appear. Click Continue Anyway

10) Under Models, select the "TBS Pro Series Fiji…" driver and click
    Next, and Next again

11) A window "The Software you are installing has not passed Windows 
    Logo testing to verify its compatibility with Windows XP" will 
    appear. Click Continue Anyway

12) The Multisound Hardware Installation window will appear. Be sure to
    specify in Card Type whether you are installing a Pinnacle or a Fiji.

13) Choose the proper Resource Settings.
    A typical configuration for a Fiji would be:
      
      - Control I/O port: 250, 260 or 270 (set on jumper J9) 
      - DSP I/O: (can be anywhere from 110 to 3E0; 140 will usually work).
      - DSP Interrupt: IRQ 5, 10, 11 (choose one that's free)
      Click OK

14) Click Finish and Restart.

15) IMPORTANT! Run the Setup.exe program from the drivers folder to install
               the TBS Pro Series Mixer and system applets as well as 
               to Register the card in the system.

____________________________________________________________________________