Malibu Surround 64 - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
Win 3.x - After installing, Windows goes to a command prompt; not the desktop 
To correct this: 

1) From DOS, type the following:

     edit config.sys [press [ENTER]]

2) You'll now see your "config.sys" file in the editor:

     DEVICE=C:\MALIBU\CS4232C.EXE 
     DEVICE=C:\WINDOWS\HIMEM.SYS
     DEVICE=C:\DOS\EMM386.EXE NOEMS
     STACKS=9,256
     DEVICE=C:\tb-ide.SYS /D:MSCD001 /P:170,15,M  /V
     LASTDRIVE=e
     shell=c:\command.com /p /e:1024

3) Add "/O" (forward slash, letter O as in Oscar) to the first line so 
   that it now looks like this:

     DEVICE=C:\MALIBU\CS4232C.EXE /O

   This will override Plug'n'Play and use the "cs4232.ini" file in the 
   c:\malibu directory for the resource settings.

4) Save the changes and reboot.  Now you will be able to run Windows with 
   the full sound of the Malibu Surround 64.