Monte Carlo - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
System files additions: 929 Disk 4 Install with V-Synth Drivers (DOS/Win3.1) 
"config.sys"
------------
device=C:\MCARLO\dosapps\mcmode.exe

"autoexec.bat"
--------------
SET PATH=C:\WIND;C:\DOS;C:\MCARLO\DOSAPPS
SET blaster=a220 i7 d1 t2

"system.ini"
------------
[386Enh]
softsnth=yes
device=C:\MCARLO\drv\softnote.386
device=C:\MCARLO\drv\vsnd16d.386
[drivers]
MIDI=C:\MCARLO\drv\mpu401.drv
MIXER=C:\MCARLO\drv\mad16c.drv
AUX=C:\MCARLO\drv\mad16c.drv
WAVE=C:\MCARLO\drv\mad16c.drv
MIDI1=C:\MCARLO\drv\mad16c.drv
MIDI2=C:\MCARLO\drv\softnote.drv
timer=timer.drv
midimapper=midimap.drv
[sndsys.drv]
LineMixer= 
CDMixer=Aux1
FMMixer=Aux2
Default IRQ=7
IRQ 11=1
IRQ 10=1
IRQ 9=1
IRQ 7=1
Default I/O=530
I/O F40=1
I/O E80=1
I/O 604=1
I/O 530=1
Default DMA=1
DMA 3=1
DMA 1=1
DMA 0=1
EnableAutoAcquireOPL3=1
MIDI Play=1
AutoSelect=1
Msft Support=1
Msft Hardware=1
BlasterSupport=OTI929
WatchMSDosExec=1
OldMSDosGameCompatibility=1
DMABufferSize=36
SingleModeDMA=1
Duplex=Half
DMADAC=1
DMAADC=1
Interrupt=7
IOAddress=530
[mpu401.drv]
port=330
int=9
[opl3.drv]
portFM=388
int=0
[mad16c.drv]
DMABufferSize=32
SingleModeDMA=Yes
RightSynthVol=32767
LeftSynthVol=32767
VoiceADCSource=MIC
RightVoiceADCLineVol=32767
LeftVoiceADCLineVol=32767
RightVoiceADCMicVol=0
LeftVoiceADCMicVol=32767
WaveADCSource=MIC
RightWaveADCLineVol=32767
LeftWaveADCLineVol=32767
RightWaveADCMicVol=0
LeftWaveADCMicVol=32767
RightDACVol=32767
LeftDACVol=32767
RightLineInVol=32767
LeftLineInVol=32767
RightMasterVol=65535
LeftMasterVol=65535
Mute=No
DMADAC=1
DMAADC=1
Interrupt=7
IOAddress=530