Catalina - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
INSTALLATION 
Insert the Catalina into a free PCI slot. 
 
1.  Connect your powered speakers, microphone, and any other audio peripherals
    to the appropriate inputs and outputs on the Catalina.

2.  Turn on the PC. After Windows has booted, if the "Add New Hardware Wizard"
    is displayed, click on the Cancel button to end this process. It is 
    IMPORTANT that you click on Cancel at this screen to properly install 
    your sound card drivers.

3.  Insert the Turtle Beach Installation CD into the CD ROM drive. If the
    installation menu does not appear within 30 seconds, click on the 
    "My Computer" icon, double-click on the CD-ROM drive icon to open it 
    and run 'SETUP.EXE'.

4.  When the Catalina installation menu appears, select Catalina Driver Setup.
    Follow the instructions that appear during the install, selecting the 
    options that best match your audio setup.
   
    If a dialog box appears, explaining that the software has not passed 
    Windows Logo testing or does not have a Digital Signature, click 
    "Continue Anyway" or "Yes" (depending on the operating system).

5.  When prompted, reboot the system. While preparing for reboot, the PC may 
    appear to be temporarily "frozen". Do not interrupt the computer at this 
    time. Wait a few minutes for the installation to complete. The wait time
    will vary depending on the speed of your PC. Please wait for the system 
    to reboot to properly complete the installation.

                       ******************************

TO UNINSTALL CATALINA:
If you should ever need to uninstall your Catalina sound card, follow these
instructions:

1.  Open the Windows Control Panel (Start?? Settings ?? Control Panel).

2.  Open the Add/Remove Programs applet (Add or Remove Programs in Win XP).
    Select Turtle Beach Catalina and click on the Add/Remove button 
    (Change/Remove in Win XP) to the lower right of the screen.
3.  Shut down your PC, remove the Riviera board, then reboot your PC.

    The Catalina drivers and software applications are installed separately.
    When removing the card, you should follow the same procedure as above to
    remove the applications also. 

    Using the Uninstall link from the Turtle Beach Catalina program group will
    remove only the applications.
______________________________________________________________________________