This error means that the digital information that is being received by the 
Pinnacle does not match the selected sample rate in the program that you are 
using to record.  

Digital information can be transmitted at various rates (measured in KHz). 
To record digital information via the Pinnacle, the record rate must match 
the source playback rate. (Example: Recording from a DAT, if the information 
on the DAT was recorded at 48 KHz, it must be recorded on the Pinnacle at 48 
KHz.)  The Pinnacle can receive information at 32 KHz, 44.1 KHz and 48 KHz. 
The current drivers automatically select the correct incoming rate.  

Note: It is necessary to select the correct sample rate in whatever 
      application you are using to record.  Usually, this is set in an 
      Options menu.  Once the information has been recorded into the 
      computer, it can be converted to a different sample rate.