(AXT and XBL) 2.5mm comm plug wiring:
-------------------------------------
The EarForce XBL microphone circuit is wired similarly to the
Microsoft-supplied headset mic circuit. This allows use of a cellphone
connector, and any adapters that will work with these.
2.5mm plug, 3-conductor plug, wired to:
--> TIP conductor on 2.5mm plug goes to TIP on PINK 1/8" plug for
--> Microphone RING conductor on 2.5mm plug goes to TIP on GREEN 1/8"
--> plug for Earphone/speaker SLEEVE conductor goes to SLEEVE conductor
(Common Ground)
_____________________________________________________________________________
|