Support for Legacy products is limited to the info posted on our Website.
____________________________________________________________________________


If you wish to experiment with Win XP using a Pinnacle, here are
(strictly *unsupported*) instructions:

IMPORTANT!
   Before you begin make sure that your Pinnacle is jumpered for "Non PnP"
   installation. Please consult your manual on this. 

1) Open the Add Hardware applet.
   (Start > Control Panel > Printers and Other Hardware > Add Hardware.

2) The "Add New Hardware" window will appears. Click Next 
   Win XP will search for new hardware. 

3) Select "Yes, I have already connected the hardware". Click Next

4) Select "Add a New Hardware Device" from the list.  Click Next

5) Select "Install the hardware that I manually select from a list". 
   Click Next

6) Select Sound, video and game controllers.  Click Next

7) Click on Have Disk...

8) Browse to the directory where you have stored your Pinnacle drivers.
   When the OEMSETUP.INF file is found, select it and click Open, then OK. 

9) A window "The Software you are installing has not passed Windows 
   Logo testing to verify its compatibility with Windows XP" will 
   appear. Click Continue Anyway

10) Under Models, select the "TBS Pro Series Pinnacle" driver and click
    Next, and Next again

11) A window "The Software you are installing has not passed Windows 
    Logo testing to verify its compatibility with Windows XP" will 
    appear. Click Continue Anyway

12) The Multisound Hardware Installation window will appear.  Be sure to
    specify in Card Type whether you are installing a Pinnacle or a Fiji.

13) Choose the proper Resource Settings.
    A typical configuration for a Pinnacle would be:
      
      - Control I/O port: 250, 260 or 270 (set on jumper J9) 
      - DSP I/O: (can be anywhere from 110 to 3E0; 140 will usually work).
      - DSP Interrupt: IRQ 5, 10, 11 (choose one that's free)
      - MIDI Interrupt: IRQ 5, 10, 11 (Pinnacle ONLY)
      - MIDI I/O: (Pinnacle ONLY; 300 or 330 will usually work)
        Click OK

14) Click Finish and Restart.

15) IMPORTANT! Run the Setup.exe program from the drivers folder to install
               the TBS Pro Series Mixer and system applets as well as 
               to Register the card in the system.

______________________________________________________________________________