NOTE: All BIOS systems are different, so the following can only serve as
general instructions and might not apply to your particular system:
      
1. When you boot your machine, there will usually be a message that says
   "Press F2 to enter setup," or something similar. Press the appropriate
   key and enter your BIOS.        
2. Look for an option called Plug and Play. You may have to look under the 
   advanced setup for this.       
3. Within the Plug and Play, there should be a setting labeled 
   ISA Shared Memory Size.  Change this from Disabled to 32K.        
4. An option will appear labeled ISA Shared Memory Base. Change this to
   D000h, or whatever RAM address the card is set at.       
5. Save this to your CMOS and Exit.