Tahiti - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
Error: "Tahiti Hardware Not Responding" (Win 3.x) 
Run diagnostics and pay close attention to three important tests: 

1) Testing the I/O. 
2) Testing the Interrupt System. 

If either of these tests fails: 

  1. Open the Control Panel from the Main program group.
  2. Open Drivers in the Control Panel group. 
  3. Select "TBS Tahiti waveform, MIDI & Aux" (or "TBS MultiSound waveform, 
     MIDI, & Aux") and click [Setup].  (If Quad drivers are installed, 
     the driver will be called "TBS Tahiti Quad..." or "TBS MultiSound 
     Quad...") 
  4. A dialog box will appear where you can reconfigure the Port Address, 
     IRQ, and Memory.  Make appropriate changes and Save them.
  5. Restart Windows. 

3) Testing the DSPRAM. 
   If this test gives an error, try disabling shadow RAM in the BIOS. 
   (See "Shared RAM Address Error" for an explanation of this procedure.)