*IMPORTANT* Upgrading to newer version 1.5 drivers is not recommended if 
  your system has no problems with the current drivers.  Only if you have 
  any problems or need to reinstall should you proceed with the following.  

1) Obtain the latest drivers version 1.5 ("2000_95.zip") from 
   our web (www.voyetra-turtle-beach.com) or FTP site 
   (ftp.voyetra.com/pub)

2) Extract the file to a floppy disk or a folder on your hard drive.

3) Locate the "cleantbs.inf" file on the installation diskettes. 
   Right-click on the file name and selecting Install.  This will remove 
   the previous unsuccessful installation. 
  
4) Reboot the system. 

5) After the sound card is detected, begin the installation process again, 
   using the 1.5 drivers.   

6) If you experience problems with the newer drivers: 
   a) Download the EEPROM Update file ("2000_upd.zip") from our web or 
      FTP site. 
   b) Extract the file to a folder on the hard drive. 
   c) With the card in the system, boot into Real Mode DOS. 
   d) Change directories to the folder you extracted the EEPROM Update to. 
   e) Type UPDATE and hit [ENTER] to run the utility. 
   f) Follow the directions on screen
   g) At end it should report: Successful.  
   h) Run the install again (steps 3 - 5 above)

7) If after installing the new drivers, you receive the error message: 

     Error: "Protection Error" on restart (Win95)

   Remove the following line from your "config.sys" file: 

     DEVICE=C:\windows\TBS2000.EXE /w