CD-Recordable Kits - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
Win 95 - Device Manager shows 7 CD-R Drives! 
This indicates that the SCSI ID for the CD-R drive or the SCSI host 
adapater is set to an incorrect value. (For SCSI, each device must have its 
own unique ID.)

Verify that the adapater is set to ID 7: 
1) From DOS-only mode, run "cfg5140.exe" included on the CD Master 
   installation diskette.
2) Find the Host SCSI ID section.  Make sure the value is set to 7. 
3) Write the changes and exit.  

If you are still having a problem, the SCSI ID for the Ricoh drive is not 
set correctly.  The SCSI ID for the drive is set by jumpers on the back of 
the unit.  See 'Jumper Settings for SCSI ID number' for details.