Board Was not Found
-------------------
This is usually a conflict between the hardware settings and the
[tropmidi.drv] section.  This may happen if you change the hardware 
settings, without changing the SYSTEM.INI file to match the new settings.  
Check the hardware and software settings to make sure they match.


Interrupt Error, 09D0
--------------------- 
This means that the interrupt selected in the [tropmidi.drv] section is not
free.  A good way to find a free interrupt is to run the SETUPSND program in
DOS.  If SETUPSND completes successfully in DOS, it usually will work in
Windows.


VSNDSYS.386 Errors
------------------
Usually these errors mean that there is a configuration conflict with the
[sndsys.386] settings.   Try changing the Port, IRQ and DMA settings in the
sndsys.drv section.  It may also mean however that the device=vsndsys.386
line is missing from the [386enh] section, or that there are still drivers
from another sound card in the SYSTEM.INI.


_____________________________________________________________________________