Tropez Plus - FAQs
All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.
Wavetable won't initialize at cold boot (Win 95) 
If the wavetable won't initialize under Windows 95 during a cold boot 
(physically, turning the computer Off then On again), but does during a warm 
boot (CTRL-ALT-DEL or Start -> Restart), the card is not initializing in time 
for Windows 95. 

To fix this: 

* Add "setupsnd" to your "autoexec.bat" file, to initialize the card under
  DOS.  Please see your documentation on how to configure setupsnd.

* Also, check your BIOS setup program for a boot speed option or quick boot
  option.  Make sure that your system is set to boot at a normal or slow
  speed.  To enter your BIOS, watch your computer's monitor when you first
  turn on the computer.  You may see a message that says, "Press [_] to
  enter setup"  The [_] will be some key such as [DEL] or [F1].  Press that
  key when prompted and you will be able to enter the setup program.  Please
  be careful in the setup program.  Improper use of setup may result in your
  machine being unable to start up.  

* Also, try putting the line

    device=c:\tbeach\tbs2001.exe /w

  in your "config.sys" file, twice in a row.