MultiSound Classic - Frequently Asked Questions

MultiSound Classic - FAQs

All files and documentation are offered on an *AS IS* basis and you assume full responsibility for using them.

Jumper Settings for the MultiSound

If your MultiSound's serial number is 3140 or below, use these settings:

I/O Port (Hex)         Switch Setting
                       Sw1 Sw2 Sw3
$290 (Factory Default) On  On  On
$260                   Off On  On
$250                   On  Off On
$240                   Off Off On
$230                   On  On  Off
$220                   Off On  Off
$210                   On  Off Off
$3E0                   Off Off Off

If your MultiSound's serial number is 3141 and above, use these settings:

I/O Port (Hex)         Switch Setting
                       Sw4 Sw3 Sw2
$290 (Factory Default) On  On  On
$260                   Off On  On
$250                   On  Off On
$240                   Off Off On
$230                   On  On  Off
$220                   Off On  Off
$210                   On  Off Off
$3E0                   Off Off Off