Salesforce

Stealth 300 For Xbox One - Xbox Setup

« Go Back
Information
Stealth 300 For Xbox One - Xbox Setup
360056814294-Stealth-300-For-Xbox-One-Xbox-Setup
New Section

To set your wired headset up for use with an Xbox console, please do the following. Please note that these instructions will apply to both the Xbox One and the Xbox Series X|S consoles.

1. Plug the headset into the Xbox controller, and power the headset on.

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

Audio_2_-_Audio.png

3. Configure your settings as shown:

  • Set Headset Volume to Maximum
  • Set Headset Chat Mixer to the Middle Setting
  • Set Mic Monitor to Minimum

Audio_3_-_Mic_Mic_Min.png

4. Make sure that the Game/Chat audio and the Mic Monitoring are adjusted to your liking by moving the upper and lower volume dials, respectively.

If you navigate through the console menu, play a game, or enter a party chat, you should now be able to hear the navigation tones, game audio and chat audio.


WINDOWS SONIC SURROUND SOUND

1. While in the Home screen, press the Xbox button on the controller. You'll see the following screen:

Sonic_1_-_Home_Screen.png

2. Navigate to the Profile & System Tab, and select "Settings".

Sonic_2_-_Profile___System.png

3. Go to General >> Volume & Audio Output

Sonic_3_-_Volume__Audio_Output.png

4. In the Headset Audio column (right side of the screen), set Headset Format to Windows Sonic For Headphones.

Sonic_4_-_Windows_Sonic.png

 


Powered by