Tactical Audio Controller - LED Blackout Mode

If you find the LED lights on the Elite Pro Tactical Audio Controller (TAC) are too bright or distracting, you can set the TAC to "LED Blackout Mode." In this mode, the LED lights on the TAC will dim automatically when the controls are not in use.

 

To set the TAC to LED Blackout Mode:

1.) Start with the TAC powered ON.

2.) On the TAC, press and hold down the MIC MUTE + "PRESETS" + "SURROUND MODE" buttons for about 3 seconds, or until the LED lights on the TAC blink three times. All of the LED lights on the TAC - except for the microphone indicator LED - should now be OFF. If so, the TAC has now successfully been set to LED Blackout Mode.

 

To toggle LED Black out Mode back OFF, once again press and hold down the MIC MUTE + "PRESETS" + "SURROUND MODE" buttons for about 3 seconds, or until the LED lights on the TAC blink three times. All the LED lights on the TAC should be on once again.

 

If you have any questions about this setup, please contact our Support Team.


Comments

0 comments

Please sign in to leave a comment.