PX3 - User Guide & Quick Start Guide

The PX3 User Guide and Quick Start Guide are available for download here. You can also view the contents of that Quick Start Guide below.


PACKAGE CONTENTS

  1. PX3 Headset (A)
  2. PX3 Transmitter (B)
  3. Headset Charging Cable (C)
  4. Xbox 360 Talkback Cable (D)
  5. Transmitter USB Cable (E)
  6. RCA Splitter Cable (F)
  7. PX3 Presets Reference Card (G)
  8. Turtle Beach Sticker (H)

Package_Contents.PNG


HEADSET FUNCTIONS

RIGHT SIDE VIEW

  1. Power
  2. Main Preset
  3. Alternate Presets

Headset_Controls_BOT.png

RIGHT SIDE BOTTOM VIEW

  1. Mic/Mute Switch
  2. Chat Volume
  3. Xbox 360 Talkback Cable Port
  4. Mini USB Port
  5. Game Volume

Headset_Controls.PNG


TRANSMITTER FUNCTIONS

Transmitter_Functions.PNG

  1. Mode Selection 
  2. Power/Pairing LED

Transmitter_Functions1.png

  1. Pairing Button
  2. Game Audio Input
  3. Audio/Power USB Port
  4. AUX Input
    • Only works in PS3 and Xbox 360 Modes
  5. Headset Charging Port

PAIRING THE HEADSET AND TRANSMITTER

Your headset and transmitter should come pre-paired. If you are experiencing any problems with the connection please follow the steps below.

Pairing.PNG

  1. Make sure the Headset is OFF.
  2. The LED on the Headset should be OFF.
  3. Press and hold the POWER button on the Headset for more than 6 seconds. A tone will sound and the LED on the Headset will begin to blink rapidly.
  4. Press and hold the PAIR button on the Transmitter for 3 seconds. The LED on the Transmitter will begin to blink rapidly.
  5. After a few seconds, the Transmitter LED should be solid, and the Headset LED should be blinking about once per second. The Headset and Transmitter are paired.

XBOX LIVE CHAT SETUP

Xbox_Live_Chat_Setup.PNG

CONFIGURE XBOX 360 VOICE SETTINGS

  1. Press the Xbox 360 Guide Button, select Settings >> Preferences >> Voice
  2. Set Voice Volume to 10.
  3. Set Game Volume to 10.
  4. Set Voice Output to Play Through Headphones.

Xbox_Live_Chat_Config.PNG


PS3 SETUP (HDMI)

PS3_Setup.PNG

CONFIGURE PS3 SOUND SETTINGS

  1. In the PS3 Menu select Settings >> Sound Settings >> Audio Multi-Output >> On.

PS3_Setup1.PNG


PS3 SETUP (COMPOSITE)

PS3_Setup__Composite_.PNG

CONFIGURE PS3 SOUND SETTINGS

  1. In the PS3 menu select Settings >> Sound Settings >> Audio Output Settings.
  2. Select "Audio Input Connector/SCART/AV MULTI" to send the audio output to the PX3.
  3. Press X to save this setting.

PS3_Setup__Composite_1.PNG


CONFIGURE PS3 ACCESSORY SETTINGS

1. In the PS3 Menu, select Settings >> Accessory Settings >> Audio Device Settings.

PS3_Accessory_Settings.PNG

2. Set the Input Device and Output Device to Turtle Beach PX3 (PS3).

PS3_Accessory_Settings1.PNG

3. Set the Microphone Level so that the bar graph barely reaches the red area when you speak loudly. Recommended Setting: 4 or 5. Select OK.

PS3_Accessory_Settings2.PNG


XBOX 360 SLIM SETUP

XBOX 360 SLIM SETUP (HDMI)

Xbox_360_Slim_Setup__HDMI_.PNG

XBOX 360 SLIM SETUP (HDMI ALTERNATE)Xbox_360_Slim_Setup__HDMI_ALT_.PNG

*An Xbox 360 Audio Adapter (available from the Turtle Beach Webstore and third-party sellers) is required for HDMI setup on original Xbox 360 and Xbox 360 Slims models.

No adapter is necessary for the Xbox 360 E.

NOTE: If your HDMI TV has red/white AUDIO OUT RCA jacks, you can use them to feed audio from your TV to your PX3 transmitter.


XBOX 360 SETUP (COMPOSITE)

Xbox_360_Setup__Composite_.PNG


XBOX 360 E SETUP

XBOX 360 E SETUP (HDMI)Xbox_360_E_Setup.PNG

XBOX 360 E SETUP (COMPOSITE)

Xbox_360_E_Setup__Composite_.PNG


Comments

0 comments

Please sign in to leave a comment.