Stealth 500X - User Guide & Quick Start Guide

The Stealth 500X User Guide and Quick Start Guide are available for download here. You can also view the contents of that Quick Start Guide below: 


PACKAGE CONTENTS

  1. Stealth 500X Headset (A)
  2. Stealth 500X Transmitter (B)
  3. Mobile Cable (C)
  4. Removable Mic Boom (D)
  5. USB Charging Cable (E)
  6. Digital Optical Cable (F)
  7. Turtle Beach Sticker (G)
  8. Preset Reference (H)

Package_Contents.PNG


HEADSET CONTROLS 

 

LEFT EARCUP

Headset_Controls_-_Left_Ear.PNG

  1. Mic Monitor
    • Press to adjust level (Off/Low/High)
  2. Power LED
    • Battery Status
      • Red - Low Battery
      • Green - Charged
    • Pairing Status
      • Single Blink - Transmitter Connected
      • Double Blink - Transmitter Not Connected
  3. Mic Mute
  4. Chat Volume
  5. Wired Audio Connection
  6. Game Volume

RIGHT EARCUP

Headset_Controls_-_Right_Ear.PNG

  1. Preset +/-
    • Press to cycle through Audio Presets*
  2. Preset LED
  3. Surround +/-
    • Press to cycle through Surround Modes*
  4. Charging LED
    • Red - Charging
    • Off - Charge Complete
  5. USB Charging Port

*For details, please refer to the Preset Reference.


TRANSMITTER

Transmitter.PNG

  1. Digital Input LED
    • Solid - Digital Audio Signal
    • Off - No Digital Audio Signal
  2. Preset LED
  3. Surround Mode LED
  4. Pairing LED
    • Solid - Headset Connected
    • Double Blink - Headset Not Connected
  5. Pairing LED 
    • For more information, please see "Pairing" or click here.
  6. Preset Button
    • Press to cycle through Audio Presets*
  7. Surround Button
    • Press to cycle through Surround Sound Modes*

*For details, please refer to the Preset Reference.


MOBILE CONFIGURATION

Mobile_Setup_REQ.PNG

Mobile_Setup.PNG


 XBOX ONE SETUP

Xbox_One_Setup_REQ.PNG

Xbox_One_Setup.PNG

  1. Go to the Xbox One Home Screen and press Capture.PNG on the Xbox One Controller.
  2. Go to Settings >> Display and Sound >> Optical Audio, and select Bitstream Out.
  3. Go to Settings >> Display and Sound >> Bitstream format, and select Dolby Digital.

PAIRING

Pairing_REQ.PNG

The Stealth 500X Headset and Transmitter come paired out of the box. When paired, with both the Headset and Transmitter powered on, the Transmitter's LED will be on solid (lit, but not blinking). However, if your Transmitter's LED is double-blinking, follow the steps below to pair your Headset and Transmitter.

1. Start this process with the headset powered OFF. Press and hold the Pairing Button on the Transmitter until the Transmitter's Pairing LED flashes rapidly (5 seconds), then release.

Pairing_-_Transmitter.PNG

2. Press and hold the Power Button on the Headset until the Headset's Power LED flashes rapidly (5 second), then release.

Pairing_-_Headset.PNG

3. Within 30 seconds, the Transmitter's LED will remain on solid, and the Headset's Power LED will blink steadily once per second, indicating that pairing has been successful.


CHARGING

Charging_REQ.PNG

Charging.PNG

The Stealth 500X headset uses a rechargeable battery. Make sure to charge it regularly.

Headset Storage

Always charge your headset before storing it before any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.


 For more detailed product and setup information, please click here.

Headset_and_Console.PNG



Comments

0 comments

Please sign in to leave a comment.