DX11 - Specifications

Headset

• 40mm diameter speakers with neodymium magnet
• Speaker Frequency Response: 30Hz - 20kHz, >120dB SPL @ 1kHz
• Condenser Microphone Frequency Response: 50Hz - 15kHz
• Cable length: 16 ft. (4.877m)
• Weight: 6.4 oz (233g)

In-Line Amplifier

• Headphone Amplifier: Stereo DC-coupled, 35mW/ch, THD <1%, Frequency Response: DC - 30kHz
• Mic mute switch
• XBOX® controller 2.5mm input jack
• Maximum analog input level with volume control on maximum setting: 2Vpp (700mV rms)
• 3.5mm plug for mic output
• 3.5mm plug for line input
• Weight: 1.3 Oz (36g)
• USB connector for power (5VDC @ <50mA max)
• Dimensions: Height .5in (1.27cm), Width 2in (5.08cm), Depth .75in (1.905cm)

DSS Processor

• Stereo headphone output with volume control
• Headphone Amplifier: Stereo 35mW/ch, THD <1%
• Frequency response: 20Hz - 20kHz
• 150MIPS Digital Signal Processor for Dolby processing
• Optical TOSLINK digital audio input compatible with 48kHz digital audio
• Maximum analog stereo input with volume control on maximum setting: 2Vpp (700mV rms). Input sensitivity may be adjusted to accept higher level signals by lowering the volume control
• Dimensions: Height 3.0 in (7.5 cm), width 2.125 in (5.5 cm), depth 0.75 in (2cm)
• Weight: 1.4 Oz (40g)
• Power requirements: 5VDC @120mA max

Package Dimensions

• 8.75 x 12.5 x 3.7 (inches)