1. Turtle Beach
  2. Legacy
  3. Stream Mic

Stream Mic - User Guide and Quick Start Guide

The Turtle Beach Stream Mic User Guide and Quick Start Guide are available for download here. You can also view the contents of the Stream Mic Quick Start Guide below:

 PACKAGE CONTENTS

Package_Contents.PNG

  1. Microphone (A)
  2. Frame (B)
  3. USB Cable (C)
  4. Adjustment Knobs (2) (D)
  5. Stand (E)
  6. Locking Cap (F)
  7. Mic Boom Adapter (G)*

* Only used when connecting the Turtle Beach Stream Mic to a Mic Boom (sold separately). 

ASSEMBLE THE STREAM MIC

TABLE TOP SETUP                                                                                               BOOM MOUNT SETUP

Capture.PNG

assembly3.PNG

NOTE: The Mic Boom Adapter (G) is only used when connecting the Turtle Beach Stream Mic to a Mic Boom (Sold Separately).

For a video demonstration, please click here.

CONNECT YOUR HEADPHONES (OPTIONAL)

Connect your favorite headphones to listen to Game, Chat, and Mic Monitor Audio through the Turtle Beach Stream Mic.

headset_connection.PNG

NOTE: If there is no headphone connected to the Stream Mic, it will display only as a Recording Device.

For a video demonstration, please click here.

PERSONALIZE YOUR MICROPHONE SETTINGS

Mic Mute Button & LED Indicator

personalize1.PNG

LED INDICATOR POLAR PATTERNS BEST USED FOR
Red - Mic Off N/A    N/A
Green - Cardioid polar_1.1.PNGpolar_1.2.PNG

Streaming (Twitch)
Video Recordings (Youtube)
Voice-Overs
Purple - Bi-Directional polar_2.1.PNGpolar_2.2.PNG

Interviewing
Co-Op Streaming
Orange - Hypercardioid polar_3.1.PNGpolar_3.2.PNG Noisy Rooms
Blue - Omnidirectional polar_4.1.PNGpolar_4.2.PNG

Quiet Room
Group Recording

personalize2.PNG

  1. Headphone Jack
  2. Master Headphone Volume Control
  3. Rear LED
    • See Table below for more information.
  4. Polar Pattern/Mic Sensitivity Button
    • Short Press - Cycle Polar Patterns (Front LED)
    • Long Press - Toggle Low/High Mic Sensitivity (Rear LED)
  5. Console Mode Switch
REAR LED SENSITIVITY BEST USED FOR

Green

 High Table-Top

Off

 Low Boom/Close Proximity

For a video demonstration and information about how to update the firmware and customize your sound, please click here.

XBOX ONE SETUP

  1. Set Console Mode Switch to Xbox One.
  2. Make sure the Xbox One is fully powered on and signed into an Xbox Live profile when connecting the Turtle Beach Stream Mic.

xbox_setup.PNG

 

 PS4 SETUP

  1. Set Console Mode Switch to PS4/PC.
  2. Go to Settings >> Devices >> Audio Devices.
  3. Select USB Headset for Input & Output Devices.*
  4. Set Output to Headphones to All Audio.*
  5. Set Volume Control (Headphones) level to maximum.
  6. Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.

*Note: If there is no headphone connected to the Stream Mic, the Output Device Settings will not be available.

ps4_setup.PNG

PC SETUP

  1. Set Console Mode Switch to PS4/PC.
  2. Right-click the Speaker Icon in the Windows Taskbar.
  3. Select Playback Devices.
  4. Set the Turtle Beach Stream Mic as the default Playback/Recording Device.*

*Note: If there is no headphone connected to the Stream Mic, it will display only as a Recording Device.

PC_setup.PNG

MAC SETUP

  1. Set Console Mode Switch to PS4/PC.
  2. Alt/Option+Click the Speaker Icon in the OSX Taskbar.
  3. Select the Turtle Beach Stream Mic as the default Input and Output Devices.

*Note: If there is no headphone connected to the Stream Mic, it will display only as a Recording Device.

Mac_Setup.PNG