Stealth 300 for Xbox One - Xbox One Setup and Windows Sonic Surround Sound

To set up your Stealth 300 headset for use with your Xbox One console, please do the following:

1. Press and Hold the Power button on the headset. The Power LED should light up solid, and you should hear a series of three ascending tones.

2. Plug the headset's 3.5mm plug into the Xbox One controller. If you have an older Xbox One controller, you will need an adapter, like the Headset Audio Controller.


3. Flip the mic down to unmute the mic. You should hear a tone (low high) to indicate the mic has been unmuted.

4. Press the Xbox Button while in the Xbox One's Home Screen.

3. Go to the System tab (gear icon) >> Audio.


You will see the following screen:


  • Set Headset Volume to Maximum
  • Set Headset Chat Mixer to the Middle setting
  • Set Mic Monitoring to Minimum

6. Make sure that the Game/Chat audio and the Mic Monitoring are adjusted to your liking by moving the upper and lower volume dials, respectively.

If you navigate through the console menu, play a game, or enter a party chat, you should now be able to hear the navigation tones, game audio and chat audio.


To use your Stealth 300 for Xbox One headset with Windows Sonic, please do the following:

1. Press the Xbox button on the controller while in the Xbox One Home Screen.

2. Go to the System tab (gear icon) >> Settings >> General >> Volume & Audio Output


3. Set Headset Audio Headset Format to Windows Sonic for Headphones.*

Windows_Sonic.png*At this point, you can also select Dolby Atmos for Headphones, if applicable. (sold separately).