You can download the Elite Pro 2 + SuperAmp for Xbox One Quick Start Guide here.
You can view the contents of that Quick Start Guide below:
PACKAGE CONTENTS
- Elite Pro 2 Headset (A)
- Mic Boom (B)
- Elite SuperAmp (C)
- Headset Audio Cable (D)
- USB Power & Audio Cable (E)
FIRMWARE UPDATE AND CUSTOMIZATION
Important: Update Before Using
Make sure to update to the newest firmware for the best audio experience. Connect to the Turtle Beach Audio Hub for Windows or Mac to update firmware, and for iOS and Android to customize your sound further.
HEADSET SETUP
IN-LINE CONTROLS
- Mic Mute Switch
- Switch to mute the microphone. Mic is muted when red line is visible on Mic Mute Switch.
CONTROLS AND FEATURES
- USB Power & Audio
- Stream-Out for Recording Streaming Audio on PC
- Master Volume Control
- Headset Connection
- Bluetooth Multi-Function Button
SETUP FOR XBOX ONE
- Set the SuperAmp to Xbox One Mode (Green Center LED On) - (Xbox One Mode is the Default Setting)
- Press the Xbox button on your controller.
- Go to the System tab (gear icon) >> Settings >> Display and Sound >> Volume.
- Set Party Chat Output to Headset.
SURROUND SOUND SETUP
- Press the Xbox button on your controller.
- Go to the System Tab (gear icon) >> Settings >> Display and Sound >> Audio Output.
- Set Headset Format to Windows Sonic for Headphones.
Xbox/PC mode can be selected using the Audio Hub for Android/iOS.
PC SETUP
- Set the SuperAmp to PC Mode - (PC Mode can be set using the Android/iOS Audio Hub)
- Right-Click the Speaker icon in your Toolbar and select Playback Devices.
- Right-Click Elite SuperAmp PC and select Set As Default Device.
- Right-Click Elite SuperAmp PC and select Set As Default Communication Device.
- Select the Recording Tab.
- Right-Click Elite SuperAmp PC and select Set As Default Device.
MOBILE SETUP
PROSPECS™ GLASSES RELIEF SYSTEM
For those who game with glasses, adjust the ProSpecs™ Glasses Friendly System for added comfort.
1. The ProSpecs Glasses Relief System creates a channel in the ear cushion to help reduce pressure on your glasses frame. In order to adjust this, you must firmly remove the magnetic ear cushion. Hold the ear cushion firmly and pull it away from the speaker. The ear cushion is held there magnetically and should come off with minimal effort.
2. Depending on the size of your glasses frame, use the tab adjustment to create the appropriate sized channel in the ear cushion. By default, the adjustment tab is set to the shallowest setting. To increase the size/depth of the channel in the ear cushion, simply pull the tab and attach it to the post based on your preference.
3. After you've adjusted the glasses-friendly channel to your liking, place the ear cushion back on the speaker. The ear cushion is held there magnetically and should snap back into place with minimal effort. Please make sure to line up the magnets on the ear cushion with the magnets on the headset itself, as shown.
BLUETOOTH
PAIRING
- Hold down Bluetooth Button until the LEDs begin to pulse Green.
- Connect to your headphones in your phone or Tablet Bluetooth settings.
BLUETOOTH FUNCTIONS
FUNCTION | ACTION |
Play/Pause |
Press Once |
Answer Call End Call Reject Incoming Call |
Press Once Press Once Press and Hold |
Activate Voice Recognition (if available) | Press and Hold When not in a Call |