Recon 200 - PC, Mobile, Nintendo Switch Setup

While the Recon 200 headset was designed to be used with a PS4 or Xbox One console, the headset can be used with a PC, under certain circumstances.

The Recon 200 headset can also be used with a mobile device or a Nintendo Switch, while on the go.


If your computer has a single jack for both headset audio and mic audio, you will be able to plug the headset directly into that single jack and use the headset with your computer.

PLEASE NOTE: Make sure to set the Console Mode Switch (located on the Left earcup of the headset) to "Xbox".


If your computer has separate jacks, one each for headset audio and mic audio, you will need a PC Splitter Cable for full functionality with that particular computer. Usually these separate jacks are identified either by color (Green/Pink), or by images of a mic/headset next to the individual jacks.


The PC Splitter Cable is available for purchase here on the Webstore.


To use your Recon 200 with a mobile device or Nintendo Switch (while in on-the-go mode), simply plug the headset into the 3.5mm headset jack on the mobile device/Nintendo Switch.

PLEASE NOTE: Make sure that the Console Mode Switch (located on the Left earcup of the headset) is set to "Xbox". If you are using the headset with a Nintendo Switch, the Nintendo Switch needs to be in on-the-go mode, not docked.


Was this article helpful?

If not, please drop us a comment below to let us know how this article can be improved.
Remember to use the phrase "KB Feedback".

0 out of 0 found this helpful
Return to top



Please sign in to leave a comment.