Elite Pro 2 + SuperAmp for PS4 - Update Firmware with Turtle Beach Audio Hub

For the best audio experience with your Elite Pro 2 + SuperAmp for PS4 headset, it is important to make sure your headset is running the latest firmware. Updating the headset's firmware is simple and easy with the Turtle Beach Audio Hub.

Full instructions for updating the firmware can be found below.


First, download and install the Turtle Beach Audio Hub for Windows or Mac, if you have not yet done so.

**Please NOTE: The mobile version of the Turtle Beach Audio Hub cannot be used to update the headset's firmware. The firmware update must be performed on a Windows or Mac computer, using the desktop version of the Turtle Beach Audio Hub.**

Once the Audio Hub is installed:

1. Open and run the Turtle Beach Audio Hub application.

2. Plug the mini USB end of the cable into the mini USB port on the back of the SuperAmp. Then, plug the USB end of the cable into a free USB port on the computer, while pressing and holding the Bluetooth button. The LED will blink red.

When plugged in, the connections should look as shown below:

PC_Setup_-_Copy.PNG

3. The Audio Hub will detect that the Elite Pro 2 SuperAmp is connected, and will automatically search for any available firmware updates. If there is an available firmware update, the Audio Hub will automatically prompt you to update the headset.

SuperAmpP_Update_Firmware.PNG

Click "Yes" to update the firmware. The Audio Hub will update the firmware, and will notify you when the process is complete.


Newest Firmware:

Model Firmware - SuperAmp Date Notes
Elite Pro 2 + SuperAmp for PS4 1.1.7 10/12/2018

- Game and Microphone Volume Improvements
- General Compatibility Fixes and Improvements


Was this article helpful?

If not, please drop us a comment below to let us know how this article can be improved.
Remember to use the phrase "KB Feedback".

0 out of 0 found this helpful
Return to top

Comments

0 comments

Please sign in to leave a comment.