Stealth 600 Gen 2 PS - Pairing

Pairing_1.PNG

The Stealth 600 Gen 2 for PlayStation headset and transmitter are paired out of the box. This is indicated by a solid LED on the transmitter. 

If your transmitter's LED is double-blinking, follow these steps to pair your headset and transmitter.

1. Connect your Stealth 600 Gen 2 for PlayStation Transmitter into an available USB port on your PlayStation 4 console. Your Transmitter will begin to double-blink blue as it searches for your headset.

PS4_Setup.PNG

2. Power on your Stealth 600 Gen 2 for PlayStation Headset; the LED will begin to double-blink blue as it searches for your transmitter.

Pairing_Step_2.PNG

3. Within 10 seconds, the Transmitter's and Headset's LEDs remain solid, indicating a successful pairing.

Pairing_Step_3.PNG

Please Note: After 30 seconds, your transmitter will search for both the previously paired headset, or any available Stealth 600 Gen 2 PS headset to pair to. Bring the two units closer together to ensure faster pairing. If this pairing seems to take longer than 10 seconds, do not move either the headset or transmitter or otherwise interrupt the pairing process. As long as both headset and transmitter are in the pairing mode and are near each other, the headset and transmitter should pair without issue.