You can download the Stealth 700 Gen 2 PS Quick Start Guide here.
You can also view the contents of that Quick Start Guide below.
PACKAGE CONTENTS
- Stealth 700 Gen 2 Headset (A)
- Stealth 700 Gen 2 Mini Transmitter (B)
- USB-C Charging Cable (C)
IMPORTANT
Please make sure your headset is updated with the latest firmware.
Connect to the Turtle Beach Audio Hub for Windows or Mac to update firmware.
Customize your settings with the Turtle Beach Audio Hub mobile app for Android and iOS.
HEADSET CONTROLS
- USB Charge & Update Port
- LED Indication
- See legend
- Bluetooth Multi-Function Button
- See Bluetooth Setup
- Power Button
- Press (2s) - Power On/Off
- Mode Button
- Default function: Engage/Disengage Superhuman Hearing. Remappable in mobile app.
- Mappable Wheel
- Default function: Variable Mic Monitor Volume Control. Remappable in mobile app.
- Master Volume Dial
Use Superhuman Hearing Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing by pressing the MODE button once, quickly.
Flip up mic to mute. There is an audible tone when the mic is muted (high low) or unmuted (low high).
EQ Presets are available through the Turtle Beach Audio Hub mobile app, available here. The EQ Presets include the following:
- Signature Sound
- Bass Boost
- Bass + Treble Boost
- Vocal Boost
MAPPABLE BUTTONS
The Mode Button and Mappable Wheel can be assigned to a new function based on your gaming style.
To change the button's assignment, follow these steps:
- Download the Turtle Beach Audio Hub mobile app on your iOS or Android device.
- Enable Bluetooth on your selected device, and pair with your headset to access the app.
- Swipe to the second settings screen to assign new functions.
- Once selected, your headset will save this configuration.
SETUP FOR PLAYSTATION
1. Connect Mini-Transmitter to USB Port on the console.
2. Power the headset on.
3. Go to Settings >> Devices >> Audio Devices
- Select Stealth 700 Gen 2 for Input and Output Device
- Set Output to Headphones to All Audio
- Set Volume Control (Headphones) level to maximum
- Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone
CHARGING
The Stealth 700 Gen 2 gives you 20 hours of rechargeable battery life. Make sure to charge it regularly, and before storing.
Headset Storage
Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
BLUETOOTH
PAIRING
Your Stealth 700 Gen 2 will enter Bluetooth pairing mode once powered on. If no Bluetooth connection is made within 2 minutes, Bluetooth pairing mode will stop. To put your headset into Bluetooth pairing mode, follow these steps:
- Hold down the Bluetooth button on your headset until the "Bluetooth Pairing" prompt plays.
- Select the headset in your phone or tablet's Bluetooth settings. The headset and device will pair via Bluetooth.
CONTROLS
FUNCTION | ACTION |
Play/Pause | Press Once |
Skip Forward | Press Twice Quickly |
Fast Forward | Press Twice Quickly And Hold |
Skip Back | Press Three Times Quickly |
Rewind | Press Three Times Quickly And Hold |
Answer Call | (With Call Incoming) Press Once |
End Call | (When In A Call) Press Once |
Reject Incoming Call | (With Call Incoming) Press and Hold |
Activate Voice Recognition (if available) | (When Not In A Call) Press and Hold |
PAIRING
The headset and transmitter are paired out of the box; this is indicated by a solid LED on the transmitter.
If your transmitter's LED is double-blinking, do the following to pair your headset and transmitter.
1. Connect the Mini Transmitter into a free USB port on your console. The LED will double-blink blue as it searches for the headset.
2. Press and hold the Power button on the headset to power it on. The LED will double-blink blue as it searches for the transmitter.
3. Within 10 seconds, the LEDs on the transmitter and headset will turn solid, indicating a successful pairing.
If your headset and transmitter are not able to pair after 30 seconds, your transmitter will begin to search for a new Stealth 700 Gen 2 PS headset to pair to.
LED BEHAVIORS
TRANSMITTER
TRANSMITTER LED | MEANING |
Solid Blue | Headset And Mini Transmitter Paired |
Double-Blink Blue | Not Paired |
Breathing Red | Microphone Muted |
HEADSET
HEADSET LED | MEANING |
Solid Blue | Headset And Mini Transmitter Paired |
Fast-Blinking White | Bluetooth Pairing |
Solid White Stays White For 2 Seconds, Then Changes To Blue |
Bluetooth Paired |
Breathing Blue | (While Charging) Battery Full |
Double-Blink Blue | Not Paired |
Solid Red | (While Charging) Battery Charging LED turns off when battery is fully charged (if headset is off) |
Breathing Red | Battery Low |