Stealth 700 Gen 2 Xbox - Headset Controls And Audio Features

The Stealth 700 Gen 2 Xbox headset comes with some unique headset controls and audio features.

Headset_Controls.PNG

On the back of the Left earcup, there are two volume dials. One is for the Game volume, and the other is a Mappable Wheel that, by default, controls the Chat volume.

The Game dial will control the volume of the game audio. The Mappable Wheel can control various functions (as set in the Turtle Beach Audio Hub); out of the box, this wheel will adjust the incoming Chat Volume.

**PLEASE NOTE: There is a limit to the amount the Master Volume/upper dial will move. The Mappable Wheel/lower dial will spin freely, with no stopping point. This is intentional; if your Mappable Wheel/lower dial spins freely, your headset is working as intended.**

 Below those dials is the Mode Button. Like the variable Chat dial, this can be remapped as needed, to control other features. Out of the box, pressing this button will allow you to engage or disengage the headset's Superhuman Hearing mode, which adjusts the audio to allow you to pinpoint quiet audio cues like enemy footsteps and weapon reloads.

Next to the Mode Button is the Power Button. Press and hold this button to power the headset on and off.

Next to the Power Button is the Bluetooth Multi-Function Button. Press and hold this button to put the headset into the Bluetooth Pairing Mode, which will allow it to connect to a Bluetooth-enabled device like a smartphone or mobile tablet. (For more information about Bluetooth, please click here.)

Once the headset is paired with a Bluetooth-enabled device, you can use this button for music and calls, as detailed below:

FUNCTION ACTION
Play/Pause Press Once
Skip Forward Press Twice Quickly
Fast Forward Press Twice Quickly And Hold
Skip Back Press Three Times Quickly
Rewind Press Three Times Quickly And Hold
Answer Call (With Call Incoming) Press Once
End Call (When In A Call) Press Once
Reject Incoming Call (With Call Incoming) Press and Hold
Activate Voice Recognition (if available) (When Not In A Call) Press and Hold

The LED Indicator and Connect Button are next to the Bluetooth Multi-Function Button. The LED Indicator will inform you of things like the battery level of the headset, its current pairing status (in regards to both Bluetooth devices and the console), and whether the headset is currently charging. Press the Connect button to pair the headset to your console.

For more information, please check out the charging article for this headset.

HEADSET LED MEANING
Solid Green Headset And Console Paired
Fast-Blinking Bluetooth Pairing
Solid White
Stays White For 2 Seconds, Then Changes To Green
Bluetooth Paired
Breathing Green (While Charging) Battery Full
Double-Blink Green Not Paired
Solid Red (While Charging) Battery Charging
LED Turns Off When Battery Is Fully Charged (If Headset Is Off)
Breathing Red Battery Low

Finally, after the LED indicator is the flip-to-mute Microphone. Flip the mic all the way forward to unmute the mic. The mic will stop at the second position shown in the image below, and you will hear a tone (low high) to indicate that the mic has been unmuted. Flip the mic to the first position to use the mic itself.

Mic_Mute.PNG