Recon Spark - Xbox Setup

To set your wired headset up for use with an Xbox console, please do the following. Please note that these instructions will apply to both the Xbox One and the Xbox Series X|S consoles.

1. Plug the headset into the Xbox controller, and flip the mic down to unmute it.

Xbox_Setup.PNG

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

Audio_2_-_Audio.png

3. Configure your settings as shown:

    • Set Headset Volume to Maximum
    • Set Headset Chat Mixer to the Middle Setting
    • Set Mic Monitor to Maximum

Audio_3_-_Mic_Mon_Max.png


WINDOWS SONIC SURROUND SOUND

1. While in the Home screen, press the Xbox button on the controller. You'll see the following screen:

Sonic_1_-_Home_Screen.png

2. Navigate to the Profile & System Tab, and select "Settings".

Sonic_2_-_Profile___System.png

3. Go to General >> Volume & Audio Output

Sonic_3_-_Volume__Audio_Output.png

4. In the Headset Audio column (right side of the screen), set Headset Format to Windows Sonic For Headphones.

Sonic_4_-_Windows_Sonic.png