X42 - User Guide & Quick Start Guide

The X42 User Guide and Quick Start Guide are available for download here. You can also view the contents of that Quick Start Guide below:

PACKAGE CONTENTS

  1. Ear Force X42 Headset with Removable Microphone (A)
  2. Xbox 360 XTC Talkback Cable (B)*
  3. Two (2) AAA Batteries (C)
  4. X42 Wireless Digital RF Transmitter (D)
  5. Digital Optical Cable (E)
  6. Turtle Beach Sticker

*NOTE: For best Xbox Live chat performance, use with official Microsoft Xbox 360 products.

Package_Contents.PNG

HEADSET CONTROLS

Headset_Controls.PNG

  1. Power Button
    • ON/OFF - Press and hold for 3 seconds.
  2. Talkback Cable Jack
  3. Effects Button
    • Flat
    • Bass Boost
    • Treble Boost
    • Bass and Treble Boost
  4. Game Volume Dial

TRANSMITTER CONTROLS 

Trans_Controls_1.PNG

  1. Digital Input LED
    • Lit when a digital input signal is selected. When this LED is ON, the Transmitter's analog input is turned off.
  2. Surround Sound LED
    • Lit when Surround Sound processing is toggled ON.
  3. Dolby Digital LED
    • Lit when a Dolby Digital encoded signal is detected.
  4. Power/Link LED
    • On Solid: Transmitter is paired to headset.
    • Pulsing Slowly: Transmitter and headset are unpaired, or headset is out of range.
    • Flashing Quickly: Pairing Mode

Trans_Controls_2.PNG

  1. Pair Button
  2. Surround Angles Button
    • Press to cycle through 6 different Surround Sound angles.
  3. Surround On/Off Button
    • Press to toggle on/off Surround Sound processing.

SETUP - HEADSET

Setup1.PNG

Setup2.PNG

XBOX 360 SLIM SETUP

Xbox_360_Slim_Setup.PNG

** NOTE: Remove the protective plastic caps from both ends of the Digital Optical Cable before plugging it in.**

XBOX 360 (OLDER MODELS)

Xbox_360__Older_Models_.PNG

** NOTE: Remove the protective plastic caps from both ends of the Digital Optical Cable before plugging it in.**

*NOTE: An Xbox Audio Adapter is required only if neither your Xbox 360 (older model) nor your HDTV have a S/PDIF or DIGITAL OPTICAL OUT jack.

PAIRING

In order to play audio, the X42 headset must be "paired" (linked) to its transmitter. The headset and transmitter are paired out of the box. The instructions below are only necessary if pairing appears to have been lost.

**NOTE: Maintain a distance of at least two feet between the headset and transmitter when pairing.**

Pairing.PNG

  1. Headset should be powered OFF. (Hold Power button for 3 seconds.)
  2. Press and hold the Pair button on the transmitter for five seconds, until the transmitter's Power/Link LED flashes rapidly. Release.
  3. Press and hold the headset's Power button for 6 seconds until you hear the second double-beep, then release. The headset LED will flash rapidly (twice per second). 
  4. Within 30 seconds, the transmitter Power/Link LED will remain on solid, and the headset Power light will blink steadily once per second, indicating that pairing was successful.

XBOX 360 CONFIGURATION

  1. Press the silver Xbox Guide button on your Xbox 360 controller.
  2. Go to Settings >> System Settings >> Console Settings >> Audio >> Digital Output.
  3. Set Digital Output to "Dolby Digital 5.1".

Xbox_360_Config.PNG

  1. Press the silver Xbox Guide button on your Xbox 360 controller. Go to Settings >> Preference >> Voice.
  2. Set Voice Volume to "10."
  3. Set Game Volume to "10".
  4. Set Voice Output to "Play Through Headset".

Xbox_Config_2.PNG